All posts in: quadcopter

582 Views

First flight experience-ArduCopter

First flight experience-ArduCopter   ArduCopter: ArduCopter is a multi rotor flying machine that is controlled by ArduPilot microcontroller board which is an award winning platform that won the 2012 and 2014 UAV Outback Challenge competitions. ...

363 Views

Independence Week at Tenet Technetronics

It’s time to celebrate that we as a nation are about to celebrate the 69th Independence Day on August 15th! On our part we are doing our best to offer dedicated discounts on various ranges of product lines. Feel like adding some new goodies to ...

473 Views

AVR pocket programmer solution for windows7

I had a project on Arduino, while doing that I did some mistake so suddenly Atmega328 IC has burnt. So what to do… Obviously I bought the new Atmega328 controller but it doesn’t come with boot loader. After some research I found that AVR pocket ...

741 Views

Arduino compatible Sim300 GSM Module @ Tenet Technetronics

This is a plug and play GSM Modem with a simple serial interface. Using this we can send SMS, receive SMS and do other GSM operations by controlling through simple AT commands from the micro-controllers and computers. It uses highly popular SIM300 ...

317 Views

Accessing Raspberry Pi through Serial

When you are  setting up a new Raspberry Pi, it’s helpful to have console access so that it can saves you from having the separate keyboard and monitor.So i am using this serial cable 3.3V. Inside the usb plug there is an USB to Serial conversion ...

765 Views

Experience the features of the new Arduino Leonardo

It is the first Arduino to use Atmel’s ATmegaXU4 series chip with built-in USB. Early Arduinos required a serial port connection to your computer for programming. As the platform matured, the board acquired a USB to serial conversion chip. The ...

394 Views

Pi is in stock @Tenet Technetronics

Pi is in stock @Tenet Technetronics Raspberry Pi is back to stock in huge numbers. It is really going to be a great time for the sales executives in selling out the stock and the logistics team will become too busy in shipping out the boards to the ...

321 Views

Multimeter Kit For Beginner Available @ Tenet Technetronics

To start with something simple, let’s measure voltageusing a multi-meter: Pull out your multi-meter and plug the black probe into COM (‘common’) jack and the red probe into mAVΩ. Set the multi-meter to “2V” in the DC ...

716 Views

Arrival of Makerbot Replicator 2 @ Tenet!!!!!

We received our Replicator today.    The MakerBot Replicator 2 Desktop 3D Printer is the easiest, fastest, and most affordable tool for making professional quality models.  The MakerBot Replicator 2 sets a new standard in resolution and ...